[Fachzeitschriftenartikel]
Additive manufacturing of CuCr1Zr by development of a gas atomization and laser powder bed fusion routine
In: The international journal of advanced manufacturing technology, 2020
[DOI: 10.1007/s00170-020-04941-7]

Jahns, Katrin
Bappert, Robin
Böhlke, Peter
Krupp, Ulrich

[Fachzeitschriftenartikel]
Analysis of acoustic emission signals during fatigue testing of a M36 bolt using the Hilbert-Huang spectrum
In: Structural monitoring and maintenance, 7 (1), 13-25, 2020
[DOI: 10.12989/smm.2020.7.1.013]

Leaman Weiffenbach, Felix Alberto
Herz, Aljoscha Hieronymus
Brinnel, Victoria
Baltes, Ralph
Clausen, Elisabeth

[Fachzeitschriftenartikel]
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
In: International journal of plasticity, 126, 102614, 2019
[DOI: 10.1016/j.ijplas.2019.10.002]

Liu, Wenqi
Lian, Junhe
Aravas, Nikolaos
Münstermann, Sebastian

[Fachzeitschriftenartikel]
Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model
In: Engineering fracture mechanics, 227, 106900, 2020
[DOI: 10.1016/j.engfracmech.2020.106900]

Shen, Fuhui
Münstermann, Sebastian
Lian, Junhe

[Fachzeitschriftenartikel]
Finite element simulation of residual stress induced by high energy beam welding in dual phase steel
In: Lasers in manufacturing and materials processing, online first, 23 pages, 2020
[DOI: 10.1007/s40516-020-00112-4]

Komerla, Krishna Chaitanya
Gach, Stefan
Akyel, Fatma Nur
Vossel, Thomas
Reisgen, Uwe Kaspar
et al.

[Fachzeitschriftenartikel]
Characterization of the precipitation behavior and resulting mechanical properties of copper-alloyed ferritic steel : On the occasion of his 70th birthday, this work is dedicated to our mentor, colleague and friend Prof. Dr.-Ing. habil. Dietmar Eifler
In: Materials science and engineering / A, 772, 138807, 2020
[DOI: 10.1016/j.msea.2019.138807]

Schwich, Hannah
Görzen, D.
Blinn, B.
Beck, T.
Bleck, Wolfgang
et al.

[Fachzeitschriftenartikel]
Defect formation and prevention in directed energy deposition of high-manganese steels and the effect on mechanical properties
In: Materials science and engineering / A, 772, 138688, 2019
[DOI: 10.1016/j.msea.2019.138688]

Kies, Fabian
Wilms, Markus B.
Pirch, Norbert
Pradeep, Konda G.
Schleifenbaum, Johannes Henrich
et al.

[Buch, Doktorarbeit]
Effect of cut-edge properties on hydrogen embrittlement of three high-Mn steels, ii, 105 Seiten : Illustrationen, Diagramme, 2020

Sheng, Zhendong

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Optimal Design for Metal Additive Manufacturing: An Integrated Computational Materials Engineering (ICME) Approach
In: JOM : a publication of the Minerals, 2020
[DOI: 10.1007/s11837-020-04028-4]

Motaman, S. Amir H.
Kies, Fabian Martin
Köhnen, Patrick
Létang, Maike
Lin, Mingxuan
et al.

[Fachzeitschriftenartikel]
Combined Al and C alloying enables mechanism-oriented design of multi-principal element alloys: Ab initio calculations and experiments
In: Scripta materialia, 178, 366-371, 2019
[DOI: 10.1016/j.scriptamat.2019.12.004]

Kies, Fabian Martin
Ikeda, Yuji
Ewald, Simon
Schleifenbaum, Johannes Henrich
Hallstedt, Bengt
et al.

[Fachzeitschriftenartikel]
Crystallographic orientation dependence of hydride precipitation in commercial pure titanium
In: Acta materialia, 183, 329-339, 2019
[DOI: 10.1016/j.actamat.2019.11.027]

Wang, Qian
Xu, Shun
Lecomte, Jean-Sébastien
Schuman, Christophe
Peltier, Laurent
et al.

[Fachzeitschriftenartikel]
Anisotropic polycrystal plasticity due to microstructural heterogeneity : A multi-scale experimental and numerical study on additively manufactured metallic materials
In: Acta materialia, 185, 340-369, 2019
[DOI: 10.1016/j.actamat.2019.12.003]

Motaman, Seyedamirhossein
Roters, Franz
Haase, Christian

[Fachzeitschriftenartikel]
Shear and laser cutting effects on hydrogen embrittlement of a high-Mn TWIP steel
In: Engineering failure analysis, 108, 104243, 2019
[DOI: 10.1016/j.engfailanal.2019.104243]

Sheng, Zhendong
Guo, Xiaofei
Prahl, Ulrich
Bleck, Wolfgang

[Buchbeitrag, Fachzeitschriftenartikel]
Efficient characterization tools for deformation-induced damage at different scales
In: Production engineering, 14 (1), 95-104, 2019
[DOI: 10.1007/s11740-019-00936-w]

Kusche, Carl F.
Dunlap, Anthony
Pütz, Felix
Tian, Chunhua
Kirchlechner, Christoph
et al.

[Fachzeitschriftenartikel]
Fast model for phase transformations during cooling of pre-annealed multiphase steels
In: Computer methods in materials science, 19 (4), 150-161, 2019

Szeliga, Danuta
Kuziak, Roman
Zalecki, Wladyslaw
Pidvysotskyy, Valeriy
Chang, Yuling
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
ICME approach to modelling magee effect of bainitic transformation during partial press hardening
In: KomPlasTech 2019 : Book of Abstracts ; XXVI International Conference on Computer Methods in Materials Technology, January 13-16, 2019, Zakopane, Poland ; edited by Danuta Szeliga, Łukasz Rauch ; organizing universities AGH University of Science and Technology Krakow, Silesian University of Technology Katowice, 147-149, 2019

Lin, Mingxuan
Prahl, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Modelling of high-temperature corrosion phenomena by the cellular automata approach
In: KomPlasTech 2019 : Book of Abstracts ; XXVI International Conference on Computer Methods in Materials Technology, January 13-16, 2019, Zakopane, Poland ; edited by Danuta Szeliga, Łukasz Rauch ; organizing universities AGH University of Science and Technology Krakow, Silesian University of Technology Katowice, 166-169, 2019

Jahns, Katrin
Balinski, Kamil
Wübbelmann, Jürgen
Krupp, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Anisotropic plasticity model considering the dynamic strain ageing effects
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere], 160017, 2019
[DOI: 10.1063/1.5112714]

Shen, Fuhui
Lian, Junhe
Münstermann, Sebastian
Kokotin, Valentin
Pretorius, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Crystal plasticity modelling of flow behavior under various strain rates
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere], 180015, 2019
[DOI: 10.1063/1.5112753]

Lian, Junhe
Liu, Wenqi
Zhang, Wenwen
Shen, Fuhui
Münstermann, Sebastian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Effect of plastic strain and ductile damage on elastic modulus of multiphase steel and its impact on springback prediction
In: Proceedings of the 22nd International ESAFORM Conference on Material Forming : ESAFORM 2019 : Vitoria-Gasteiz, Spain, 8-10 May 2019 / editors: Lander Galdos [und 6 andere], 180001, 2019
[DOI: 10.1063/1.5112739]

Münstermann, Sebastian
Sparrer, Yannik
Yao, Yuan
Lian, Junhe
Meya, Rickmer
et al.

[Buch]
Entwicklung eines Konzeptes zur Bewertung der Sprödbruchneigung von hochfesten Schrauben großer Abmessungen beim Einsatz bei tiefen Temperaturen, 2019

Stranghöner, Natalie
Lorenz, Christoph
Feldmann, Markus
Citarelli, Sandro
Bleck, Wolfgang
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Phase-Field Modeling of Microstructure Evolution of Binary and Multicomponent Alloys During Selective Laser Melting (SLM) Process
In: TMS 2019 148th Annual Meeting & Exhibition supplemental proceedings / The Minerals, Metals & Materials Society, editor, 301-309, 2019
[DOI: 10.1007/978-3-030-05861-6_27]

Ramazani, Ali
Kundin, Julia
Haase, Christian
Prahl, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Phase-Field Simulation of Intermetallic Phase Precipitation in a High-Al Alloyed Lightweight High-Strength Steel
In: TMS 2019 148th Annual Meeting & Exhibition supplemental proceedings / The Minerals, Metals & Materials Society, editor, 1401-1409, 2019
[DOI: 10.1007/978-3-030-05861-6_133]

Drouven, Carsten
Zou, Bowen
Song, Wenwen
Bleck, Wolfgang

[Fachzeitschriftenartikel]
Новые сырьевые материалы для чёрной металлургии
In: Чёрные металлы = Ferrous Metals, 2019 (1), 6-15, 2019

Babich, Alexander
Senk, Dieter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Correlation between microstructure and micromechanical properties of complex phase steels
In: KomPlasTech 2019 : Book of Abstracts ; XXVI International Conference on Computer Methods in Materials Technology, January 13-16, 2019, Zakopane, Poland ; edited by Danuta Szeliga, Łukasz Rauch ; organizing universities AGH University of Science and Technology Krakow, Silesian University of Technology Katowice, 20-22, 2019

Chang, Yuling
Li, Xiaoxiao
Haase, Christian
Bleck, Wolfgang

[Buchbeitrag, Fachzeitschriftenartikel]
Modeling of Microsegregation and Homogenization of 6xxx Al-Alloys Including Precipitation and Strengthening During Homogenization Cooling
In: Materials, 12 (9), 1421, 2019
[DOI: 10.3390/ma12091421]

Sarafoglou, Panagiota I.
Serafeim, Alexandros
Fanikos, Ioannis A.
Aristeidakis, John S.
Haidemenopoulos, Gregory N.

[Buchbeitrag]
Strain-Rate-Dependent Deformation Behavior and Mechanical Properties of a Multi-Phase Medium-Manganese Steel
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 144-163, 2019

Sevsek, Simon
Haase, Christian
Bleck, Wolfgang

[Buchbeitrag]
Strain Hardening, Damage and Fracture Behavior of Al-Added High Mn TWIP Steels
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 64-87, 2019

Madivala Venkateshappa, Manjunatha
Schwedt, Alexander
Prahl, Ulrich
Bleck, Wolfgang

[Buchbeitrag]
The Influence of Warm Rolling on Microstructure and Deformation Behavior of High Manganese Steels
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 14-25, 2019

Haupt, Marco
Müller, Max
Haase, Christian
Sevsek, Simon
Brasche, Frederike Lina
et al.

[Buchbeitrag]
Development of a Cr-Ni-V-N Medium Manganese Steel with Balanced Mechanical and Corrosion Properties
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 176-188, 2019

Allam, Tarek
Guo, Xiaofei
Sevsek, Simon
Lipinska-Chwalek, Marta
Hamada, Atef
et al.

[Buchbeitrag]
Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 43-53, 2019

Quadfasel, Angela
Teller, Marco
Madivala Venkateshappa, Manjunatha
Haase, Christian
Roters, Franz
et al.

[Buchbeitrag]
Austenite Reversion Tempering-Annealing of 4 wt.% Manganese Steels for Automotive Forging Application
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 134-143, 2019

Gramlich, Alexander Roald Michael
Emmrich, Robin
Bleck, Wolfgang

[Buchbeitrag]
From High-Manganese Steels to Advanced High-Entropy Alloys
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 88-101, 2019

Haase, Christian
Barrales Mora, Luis Antonio

[Buchbeitrag]
Influence of Microstructural Morphology on Hydrogen Embrittlement in a Medium-Mn Steel Fe-12Mn-3Al-0.05C
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 189-201, 2019

Shen, Xiao
Song, Wenwen
Sevsek, Simon
Ma, Yan
Hüter, Claas
et al.

[Buchbeitrag]
Physical Metallurgy of High Manganese Steels
In: Physical Metallurgy of High Manganese Steels / Special Issue Editors: Wolfgang Bleck, Christian Haase, 1-4, 2019

Bleck, Wolfgang
Haase, Christian

[Buch]
Physical Metallurgy of High Manganese Steels, VII, 202 Seiten : Ilustrationen, Diagramme, 2019
[DOI: 10.3390/books978-3-03921-857-8]

Bleck, Wolfgang
Haase, Christian

[Buch, Bericht]
Festlegung von Zähigkeitshochlagenanforderungen an Stahl mit Hilfe hybrider schädigungsmechanischer Methoden, 2019

Feldmann, Markus
Citarelli, Sandro
Münstermann, Sebastian
Könemann, Markus Josef

[Buchbeitrag, Beitrag zu einem Tagungsband]
Thermal effects on the dynamic damage and fracture of a dual phase automotive steel
In: Temperature dependence of material behaviour at high strain-rate, Proceedings of 24th DYMAT Technical Meeting, 9-11 September 2019, Stresa, Italy, DYMAT2019_P04, 6 Seiten, 2019

Chandran, Sarath
Liu, Wenqi
Lian, Junhe
Münstermann, Sebastian
Verleysen, Patricia

[Buchbeitrag, Beitrag zu einem Tagungsband]
Influence of the alloy composition of an air-hardened, martensitic forging steel on the mechanical and cyclic material behavior
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P503.pdf, 10 Seiten, 2019

Schmiedl, Tobias
Melz, T.
Gramlich, Alexander Roald Michael
Bleck, Wolfgang
Schönborn, S.
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Microstructure-based approach to predict the machinability of the ferritic-pearlitic steel C60 by cutting operations
In: Procedia CIRP, 82, 107-112, 2019
[DOI: 10.1016/j.procir.2019.04.013]

Abouridouane, Mustapha
Laschet, Gottfried
Kripak, Viktor
Dierdorf, Jens
Prahl, Ulrich
et al.

[Buch, Doktorarbeit]
Untersuchung des Aufschmelzverhaltens von Gießpulver und der Schlacke-Schmelze-Interaktion im Meniskusbereich der Stranggießkokille, ii, 186, A-14 Seiten : Illustrationen, Diagramme, 2019

Münch, Steve

[Buchbeitrag, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
The effects of shear affected zone on edge crack sensitivity in dual-phase steels
In: IOP conference series / Materials science and engineering, 651, 012073 -, 2019
[DOI: 10.1088/1757-899X/651/1/012073]

Habibi, Niloufar
Beier, T.
Richter, H.
Könemann, M.
Münstermann, S.

[Bericht]
Char formation, transportation and consumption in the blast furnace and its impact on coke rate (Charfoco) : Final Report, 192 S., 2019
[DOI: 10.2777/046097]

Born, Stefan
Pridhivi, V.
van der Stel, Jan
Babich, Alexander
Ho, Hai Thong
et al.

[Beitrag zu einem Tagungsband]
Numerical evaluation of surface roughness influences on cold formability of DP steel
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P7.pdf, 4 Seiten, 2019

Wechsuwanmanee, Peerapon
Lian, Junhe
Liu, Wenqi
Münstermann, Sebastian

[Beitrag zu einem Tagungsband]
Development of alloying concepts and process strategies for the production of safety-relevant lightweight body components
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P114.pdf, 7 Seiten, 2019

Sparrer, Yannik
Bissa, Kevin
Münstermann, Sebastian
Tenié, Alexander
Lian, Junhe
et al.

[Beitrag zu einem Tagungsband]
Analytical and simulation-based description of separations in modern high-toughness steels
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P111.pdf,7 Seiten, 2019

Lenz, David Manfred
Li, D.
Könemann, Markus Josef
Münstermann, Sebastian

[Beitrag zu einem Tagungsband]
Cleavage fracture modeling of a S355 construction steel using a modified Gurson-Tvergaard-Needleman model (GTN)
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P350.pdf, 10 Seiten, 2019

Langenberg, Julius
Könemann, Markus Josef
Münstermann, Sebastian

[Beitrag zu einem Tagungsband]
A component oriented method for the examination of toughness values of sheet metals
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P345.pdf, 7 Seiten, 2019

Könemann, Markus Josef
Henrich, Manuel
Münstermann, Sebastian

[Fachzeitschriftenartikel]
Materials and Processes for the Third-generation Advanced High-strength Steels
In: Berg- und hüttenmännische Monatshefte : BHM, 164 (11), 466-474, 2019
[DOI: 10.1007/s00501-019-00904-y]

Bleck, Wolfgang
Brühl, Fritz
Ma, Yan
Sasse, Caesar

[Beitrag zu einem Tagungsband]
Materials and processes for the third-generation advanced high-strength steels
In: METEC & 4th ESTAD 2019, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 24-28 June 2019 / [host and organizer:] Steel Institute VDEh ; [congress secretariat/organization: TEMA Technologie Marketing AG], P159.pdf, 6 Seiten, 2019

Bleck, Wolfgang
Brühl, Fritz
Ma, Yan
Sasse, Caesar