[Buchbeitrag, Beitrag zu einem Tagungsband]
Festigkeitsbewertung hochfester Schweißverbindungen anhand von Querzugversuchen
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 670-677, 2022

Reisgen, Uwe
Sharma, Rahul
Christ, Martin Leonhard (Corresponding author)
Mäde, Konrad Arno Gregor
Münstermann, Sebastian
et al.

[Buchbeitrag]
Low carbon ironmaking technologies: an European approach
In: Iron ore: mineralogy, processing and environmental sustainability / edited by Liming Lu, 777-815, 2022
[DOI: 10.1016/B978-0-12-820226-5.00011-2]

Babich, Alexander
Senk, Dieter

[Buch, Doktorarbeit]
Einfluss von Mangan und Phosphor auf die mikrostrukturellen, mechanischen und magnetischen Eigenschaften von nicht kornorientiertem Elektroband
In: Berichte aus dem Institut für Eisenhüttenkunde 1/2022, 2022

Schulte, Markus

[Beitrag zu einem Tagungsband]
Alloying and Processing of Medium Manganese Steels for Forging Applications
In: 5th International High Manganese Steel Conference - HMnS 2022 : May 23-25, Linz, Austria : e-book / Voestalpine, ASMET - the Austrian Society for Metallurgy and Materials, FH Oberösterreich, University of Applied Sciences Upper Austria, 16-19, 2022

Bleck, Wolfgang
Allam, Tarek Mansour Abdelraouf
Gramlich, Alexander Roald Michael

[Fachzeitschriftenartikel]
Neue Potenziale für Leichtbau, Emissionsreduktionen und Kreislaufwirtschaft
In: Stahl, 2 (3), 64-67, 2022

Gramlich, Alexander Roald Michael
Krupp, Ulrich

[Fachzeitschriftenartikel]
Effect of Phase-Selective Nanoscale Precipitates on the Bauschinger Effect in Austenitic-Ferritic Duplex Stainless Steels
In: Metallurgical and materials transactions / A, 53 (11), 3906-3917, 2022
[DOI: 10.1007/s11661-022-06793-0]

Kreins, Marion Cornelia (Corresponding author)
Wilkes, Jan Ingo
Wesselmecking, Sebastian
Krupp, Ulrich

[Fachzeitschriftenartikel]
Plasma Nitriding of an Air-Hardening Medium Manganese Forging Steel
In: HTM - journal of heat treatment and materials = Zeitschrift für Werkstoffe, Wärmebehandlung, Fertigung, 77 (4), 298-315, 2022
[DOI: 10.1515/htm-2022-1017]

Gramlich, Alexander Roald Michael (Corresponding author)
Auger, M. A.
Richter, S.

[Doktorarbeit]
Properties and heat treatments of air-hardening ductile forging steels, 2022
[DOI: 10.18154/RWTH-2022-08817]

Gramlich, Alexander Roald Michael

[Buchbeitrag, Beitrag zu einem Tagungsband]
Combined Probabilistic Approach and Stress State Dependency on the Failure Modeling of HPDC Aural-2 Alloy
In: Achievements and trends in material forming : peer-reviewed extended papers selected from the 25th International Conference on Materials Forming (ESAFORM 2022) : peer-reviewed extended papers selected from the 25th International Conference on Materials Forming (ESAFORM 2022), April 27-29, 2022, Portugal / edited by Gabriela Vincze and Frédéric Barlat, 1931-1938, 2022
[DOI: 10.4028/p-6v8eui]

Zhang, Yong Fa (Corresponding author)
Shen, Fuhui
Zheng, Jiang
Münstermann, Sebastian
Han, Wei Jian

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Local Formability of Different Advanced High Strength Steels
In: Key engineering materials : KEM, 926, 917-925, 2022
[DOI: 10.4028/p-dds916]

Shen, Fuhui (Corresponding author)
Wang, He Song
Xu, Hao
Liu, Wen Qi
Münstermann, Sebastian
et al.

[Fachzeitschriftenartikel]
A unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at -196 °C
In: International journal of plasticity, 156, 103365, 2022
[DOI: 10.1016/j.ijplas.2022.103365]

Shen, Fuhui
Münstermann, Sebastian
Lian, Junhe (Corresponding author)

[Beitrag zu einem Tagungsband]
Improved bainitic TRIP wire rod properties through materials and process design
In: [6th International Conference on Steels in Cars and Trucks, SCT 2022, 2022-06-20 - 2022-06-22, Milan, Italy], 2022

Ackermann, Marc Antoni
Bleck, Wolfgang
Krupp, Ulrich
Resiak, Bernard
Buessler, Pascal
et al.

[Doktorarbeit]
Application-oriented development of high-strength, high-Mn steels and their utilization, 2022
[DOI: 10.18154/RWTH-2022-08205]

Wesselmecking, Sebastian

[Fachzeitschriftenartikel]
Automated segmentation of martensite-austenite islands in bainitic steel
In: Materials characterization, 191, 112091, 2022
[DOI: 10.1016/j.matchar.2022.112091]

Ackermann, Marc (Corresponding author)
Iren, Deniz
Wesselmecking, Sebastian
Shetty, Deekshith
Krupp, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Extension of a Simulation Model of the Freeform Bending Process as Part of a Soft Sensor for a Property Control
In: Achievements and trends in material forming : peer-reviewed extended papers selected from the 25th International Conference on Materials Forming (ESAFORM 2022) : peer-reviewed extended papers selected from the 25th International Conference on Materials Forming (ESAFORM 2022), April 27-29, 2022, Portugal / edited by Gabriela Vincze and Frédéric Barlat, 2137-2145, 2022
[DOI: 10.4028/p-d17700]

Stebner, Sophie Charlotte (Corresponding author)
Maier, Daniel
Ismail, Ahmed
Dölz, Michael
Lohman, Boris
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations
In: International journal of material forming, 15 (5), 61, 2022
[DOI: 10.1007/s12289-022-01672-w]

Habraken, Anne Marie (Corresponding author)
Aksen, Toros Arda
Alves, José L.
Amaral, Rui L.
Betaieb, Ehssen
et al.

[Fachzeitschriftenartikel]
Induced electrical polarization and conductivity homogenization via internal architectural regulation in PC/PVDF/MWCNTs/PEDOT:PSS transparent conductive films
In: Polymer : the international journal for the science and technology of polymers, 254, 125088, 2022
[DOI: 10.1016/j.polymer.2022.125088]

Gong, Keqian
Xu, Xiangyang (Corresponding author)
Liu, Yanru
Huang, Wei
Liu, Qi
et al.

[Doktorarbeit]
Constitutive modeling of anisotropic deformation and failure properties under monotonic loading, 2022
[DOI: 10.18154/RWTH-2022-07422]

Shen, Fuhui

[Fachzeitschriftenartikel]
Impact of welding simulated heat treatment on hydrogen embrittlement behavior of high-strength fine-grained steels
In: Engineering Failure Analysis, 140, 106602, 2022
[DOI: 10.1016/j.engfailanal.2022.106602]

Guo, Xiaofei
Li, Tianyi
Sheng, Zhendong (Corresponding author)
Christ, Martin Leonhard (Corresponding author)
Sharma, Rahul
et al.

[Buch, Doktorarbeit]
Entstehung, Verhalten und Umsetzung von Kohlerückständen beim Einblasen in den Hochofen
In: Berichte aus dem Institut für Eisenhüttenkunde 2/2022, 2022

Ho, Hai Thong

[Fachzeitschriftenartikel]
Austenite reversion and nano-precipitation during a compact two-step heat treatment of medium-Mn steel containing Cu and Ni
In: Journal of materials research and technology : jmr&t, 17, 2601-2613, 2022
[DOI: 10.1016/j.jmrt.2022.02.008]

Xu, Zigan
Shen, Xiao
Allam, Tarek Mansour Abdelraouf
Song, Wenwen (Corresponding author)
Bleck, Wolfgang

[Fachzeitschriftenartikel]
Correlating the Microstructural Heterogeneity with Local Formability of Cold‐Rolled Dual‐Phase and Complex‐Phase Steels Through Hardness Gradients
In: Steel research international, 93 (9), 2200130, 2022
[DOI: 10.1002/srin.202200130]

Szeliga, Danuta (Corresponding author)
Chang, Yuling
Madej, Lukasz
Bzowski, Krzysztof (Corresponding author)
Perzyński, Konrad
et al.

[Fachzeitschriftenartikel]
Ductility prediction of HPDC aluminum alloy using a probabilistic ductile fracture model
In: Theoretical and applied fracture mechanics, 119, 103381, 2022
[DOI: 10.1016/j.tafmec.2022.103381]

Zhang, Yongfa
Shen, Fuhui (Corresponding author)
Zheng, Jiang (Corresponding author)
Münstermann, Sebastian
Li, Tianjiao
et al.

[Fachzeitschriftenartikel]
Yielding behavior of triplex medium Mn steel alternated with cooling strategies altering martensite/ferrite interfacial feature
In: Journal of materials science & technology : JMST, 126, 60-70, 2022
[DOI: 10.1016/j.jmst.2022.04.003]

Hu, Bin
Shen, Xiao
Guo, Qinyi
Wen, Qinghua
Tu, Xin
et al.

[Doktorarbeit]
Microstructure modeling guided design of high-strength steels, 2022
[DOI: 10.18154/RWTH-2022-05871]

Liu, Wenqi

[Fachzeitschriftenartikel]
Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models
In: International journal of fatigue, 160, 106824, 2022
[DOI: 10.1016/j.ijfatigue.2022.106824]

Durmaz, Ali Riza (Corresponding author)
Natkowski, Erik
Arnaudov, Nikolai
Sonnweber-Ribic, Petra
Weihe, Stefan
et al.

[Fachzeitschriftenartikel]
Effect of pulverized coal residues on the blast furnace streaming conditions
In: Ironmaking & steelmaking, 49 (9), 898-904, 2022
[DOI: 10.1080/03019233.2022.2071092]

Perret, Fabian (Corresponding author)
Babich, Alexander
Senk, Dieter

[Fachzeitschriftenartikel]
Effect of CO-CO2 and H2-H2O on the reduction degree of fluxed pellets : reduction mechanism within hydrogen-rich blast furnace
In: Ironmaking & steelmaking, 49 (9), 932-939, 2022
[DOI: 10.1080/03019233.2022.2071093]

Xu, Chenyang
Xu, Anjun
Zhang, Jianliang
Liu, Zhengjian (Corresponding author)
Wang, Yaozu
et al.

[Fachzeitschriftenartikel]
Experimental evidence for "double-edged sword" effect of the fibrous δ-ferrite on mechanical properties : a case study of Fe-5.95Mn-1.55Si-1.0Al-0.055C medium-Mn steel
In: Journal of materials research and technology, 18, 3834-3840, 2022
[DOI: 10.1016/j.jmrt.2022.04.077]

Yan, Shu (Corresponding author)
Li, Tianle (Corresponding author)
Xu, Zigan
Liang, Taosha
Wang, Sai
et al.

[Fachzeitschriftenartikel]
Surface roughness influence in micromechanical fatigue lifetime prediction with crystal plasticity models for steel
In: International journal of fatigue, 159, 106792, 2022
[DOI: 10.1016/j.ijfatigue.2022.106792]

Natkowski, Erik (Corresponding author)
Sonnweber-Ribic, Petra
Münstermann, Sebastian

[Fachzeitschriftenartikel]
Determination of fatigue lifetimes with a micromechanical short crack model for the high-strength steel SAE 4150
In: International journal of fatigue, 156, 106621, 2021
[DOI: 10.1016/j.ijfatigue.2021.106621]

Natkowski, Erik (Corresponding author)
Sonnweber-Ribic, Petra
Münstermann, Sebastian

[Doktorarbeit]
Processing, microstructure, and mechanical properties of medium-Mn steels containing Cu and Ni, 2022
[DOI: 10.18154/RWTH-2022-04945]

Xu, Zigan

[Fachzeitschriftenartikel]
Enhancement of electrical conductivity and corrosion resistance by gold-nickel coating of additively manufactured AlSi10Mg alloy
In: Journal of materials research and technology : jmr&t, 17, 521-536, 2022
[DOI: 10.1016/j.jmrt.2022.01.022]

Rautio, Timo
Torbati-Sarraf, Hamidreza
Allam, Tarek Mansour Abdelraouf
Järvenpää, Antti
Hamada, Atef (Corresponding author)

[Fachzeitschriftenartikel]
Very high cycle fatigue behaviors of GH4169 superalloy at room and high temperatures
In: Fatigue & fracture of engineering materials & structures, 45 (6), 1796-1806, 2022
[DOI: 10.1111/ffe.13700]

Zhang, Zhen
Teng, Zhenjie
Wang, Jingyu (Corresponding author)
Huang, Zhiyong (Corresponding author)
Münstermann, Sebastian

[Buchbeitrag, Fachzeitschriftenartikel]
A new method for the toughness assessment of mobile crane components based on damage mechanics
In: Steel construction, 15 (S1), 69-77, 2022
[DOI: 10.1002/stco.202100041]

Li, Dongsong (Corresponding author)
Könemann, Markus Josef
Dölz, Michael
Münstermann, Sebastian

[Fachzeitschriftenartikel]
Study of Intercritical Annealing in Air‐Cooled Fe‐Mn‐Al‐C Lightweight Forging Steel for Tailoring the Mechanical Properties
In: Steel research international, 93 (6), 2100622, 2022
[DOI: 10.1002/srin.202100622]

Dickert, Hans Henning (Corresponding author)
Suwanpinij, Piyada (Corresponding author)
Bleck, Wolfgang

[Fachzeitschriftenartikel]
Dynamic and Static Strain Aging in a High‐Manganese Steel
In: Steel research international, 93 (7), 2100707, 2022
[DOI: 10.1002/srin.202100707]

Wesselmecking, Sebastian (Corresponding author)
Song, Wenwen
Bleck, Wolfgang

[Buchbeitrag, Fachzeitschriftenartikel]
Air-Hardening Die-Forged Con-Rods : Achievable Mechanical Properties of Bainitic and Martensitic Concepts
In: Metals : open access journal, 12 (1), 97, 2022
[DOI: 10.3390/met12010097]

Gramlich, Alexander Roald Michael (Corresponding author)
Lange, Robert
Zitz, Udo
Büßenschütt, Klaus

[Fachzeitschriftenartikel]
Dynamic strain aging in DP1000 : Effect of temperature and strain rate
In: Materials science and engineering / A, 832, 142509, 2021
[DOI: 10.1016/j.msea.2021.142509]

Chandran, Sarath (Corresponding author)
Liu, Wenqi
Lian, Junhe
Münstermann, Sebastian
Verleysen, Patricia

[Fachzeitschriftenartikel]
Relationship between interaction under non-load condition and softening & melting behaviour of typical blast furnace feed
In: Ironmaking & steelmaking, 49 (2), 626-633, 2022
[DOI: 10.1080/03019233.2022.2036085]

Fan, Xiaoyue
Zhang, Jianliang
Jiao, Kexin (Corresponding author)
Zhang, Jian
Ma, Hengbao
et al.

[Fachzeitschriftenartikel]
Surface layer microstructure evolution during interdiffusion annealing of chromium electroplated iron substrates
In: Materials science and engineering technology = Materialwirtschaft und Werkstofftechnik, 53 (2), 190-200, 2022
[DOI: 10.1002/mawe.202100061]

Jahns, K. (Corresponding author)
Schroth, M.
Wübbelmann, J.
Krupp, Ulrich

[Fachzeitschriftenartikel]
Ermittlung von Grenzformänderungskurven an laser- und elektronenstrahlgeschweißten Stahlblechplatinen : Herrn Professor Dr. Otmar Vöhringer zum 65. Geburtstag gewidmet
In: International journal of materials research : IJMR, 94 (5), 521-525, 2022
[DOI: 10.1515/ijmr-2003-0092]

Bleck, Wolfgang
Budak, Irfan (Corresponding author)
Dahl, Winfried
Kaluza, Walter Michael

[Fachzeitschriftenartikel]
Effect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloy
In: Journal of alloys and compounds : JAL, 896, 163011, 2021
[DOI: 10.1016/j.jallcom.2021.163011]

Wang, Hao (Corresponding author)
Keller, Sören
Chang, Yuling
Kashaev, Nikolai
Yan, Kai
et al.

[Fachzeitschriftenartikel]
Material oriented crash-box design : Combining structural and material design to improve specific energy absorption
In: Materials and design, 213, 110357, 2021
[DOI: 10.1016/j.matdes.2021.110357]

Wesselmecking, Sebastian (Corresponding author)
Kreins, Marion Cornelia
Dahmen, Martin
Bleck, Wolfgang

[Fachzeitschriftenartikel]
Strain rate dependent plasticity and fracture of DP1000 steel under proportional and non-proportional loading
In: European journal of mechanics / A, 92, 104446, 2021
[DOI: 10.1016/j.euromechsol.2021.104446]

Chandran, Sarath (Corresponding author)
Liu, Wenqi
Lian, Junhe
Münstermann, Sebastian
Verleysen, Patricia

[Fachzeitschriftenartikel]
Bauschinger effect and latent hardening under cyclic micro-bending of Ni-base Alloy 718 single crystals : Part II. Single crystal plasticity modeling with latent kinematic hardening
In: Materials science and engineering / A, 830, 142030, 2021
[DOI: 10.1016/j.msea.2021.142030]

Schilli, Simon
Seifert, Thomas (Corresponding author)
Kreins, Marion Cornelia
Krupp, Ulrich

[Fachzeitschriftenartikel]
Austenite transformation and deformation behavior of a cold-rolled medium-Mn steel under different annealing temperatures
In: Materials science and engineering / A, 829, 142115, 2021
[DOI: 10.1016/j.msea.2021.142115]

Xu, Zigan
Shen, Xiao
Allam, Tarek Mansour Abdelraouf
Song, Wenwen (Corresponding author)
Bleck, Wolfgang

[Fachzeitschriftenartikel]
Local formability of medium-Mn steel
In: Journal of materials processing technology, 299, 117368, 2021
[DOI: 10.1016/j.jmatprotec.2021.117368]

Shen, Fuhui (Corresponding author)
Wang, Hesong (Corresponding author)
Liu, Zhongjian
Liu, Wenqi
Könemann, Markus Josef
et al.

[Fachzeitschriftenartikel]
Quasi Static and Fatigue Properties of Long Carbon Fiber Reinforced Polyamide
In: Journal of materials engineering and performance, 31 (1), 94-104, 2021
[DOI: 10.1007/s11665-021-06182-5]

Tiemann, Jan-Marc (Corresponding author)
Mola, Javad
Land, Philipp
Krumpholz, Thorsten
Krupp, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Approaches for Process Optimization in Continuous Casting of Slabs at Hüttenwerke Krupp Mannesmann
In: 10th European Conference on Continuous Casting : ECCC 10 : Bari, Italy, 20-22 October 2021 : proceedings / organised by AIM, Associazione italiana di metallurgia, 9 Seiten, 2021

Bolender, Thorsten
Kemper, Gerhard
Rabe, Benjamin
Schürmann, Markus
Grahe, Carolin
et al.