[Journal Article]
Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes
In: Advances in industrial and manufacturing engineering, 8, 100133, 2023
[DOI: 10.1016/j.aime.2023.100133]

Stebner, Sophie Charlotte (Corresponding author)
Martschin, Juri
Arian, Bahman
Dietrich, Stefan
Feistle, Martin
et al.

[Journal Article]
Evolution of microstructural heterogeneities in additively manufactured low-alloy steel
In: Additive manufacturing, 78, 103859, 2023
[DOI: 10.1016/j.addma.2023.103859]

Turnali, Ahmet (Corresponding author)
Motaman, S. Amir H.
Chang, Yuling
Böttger, Bernd
Serafeim, Alexandros
et al.

[Journal Article]
Thermodynamic database for multi-principal element alloys within the system Al-Co-Cr-Fe-Mn-Ni-C
In: Calphad, 83, 102644, 2023
[DOI: 10.1016/j.calphad.2023.102644]

Hallstedt, Bengt
Noori, Mehdi
Kies, Fabian Martin
Oppermann, Felix
Haase, Christian

[Journal Article]
Challenging the frontiers of superparamagnetism through strain engineering: DFT investigation and co-precipitation synthesis of large aggregated Fe3O4 (magnetite) powder
In: Journal of alloys and compounds : JAL, 968, 171895, 2023
[DOI: 10.1016/j.jallcom.2023.171895]

Saraçoğlu, Mert
Mansoor, Mubashir
Bakirdöven, Utku
Arpalı, Handenur
Gezici, Utku Orçun
et al.

[Journal Article]
Enhancement of strength in laser-joined Al-TRIP and Si-TRIP steels: Microstructural insights and deformation analysis
In: Materials science & engineering / A, 885, 145591, 2023
[DOI: 10.1016/j.msea.2023.145591]

Hamada, Atef (Corresponding author)
Khosravifard, Ali
Ghosh, Sumit
Jaskari, Matias
Kreins, Marion Cornelia
et al.

[Book, Dissertation / PhD Thesis]
Porosität in Stahlstranggussprodukten
In: Berichte aus dem Institut für Eisenhüttenkunde 2023,2, 2023

Borrmann, Lukas

[Journal Article]
Numerical investigation into effects of fracture behavior on edge cracking sensitivity
In: Journal of materials processing technology, 316, 117965, 2023
[DOI: 10.1016/j.jmatprotec.2023.117965]

Habibi, Niloufar (Corresponding author)
Zhou, Meng
Lian, Junhe
Könemann, Markus Josef
Münstermann, Sebastian

[Journal Article]
Understanding the mechanism of columnar-to-equiaxed transition and grain refinement in additively manufactured steel during laser powder bed fusion
In: Additive manufacturing, 73, 103702, 2023
[DOI: 10.1016/j.addma.2023.103702]

Narayana Samy, Venkatesh Pandian (Corresponding author)
Schäfle, Moritz
Brasche, Frederike Lina
Krupp, Ulrich
Haase, Christian

[Dissertation / PhD Thesis]
Reduction of self-reducing pellets for the use in shaft furnace by involving hydrogen reduction, 2023
[DOI: 10.18154/RWTH-2023-08504]

Wang, Rongrong

[Contribution to a book]
Toward Holistic Digital Material Description During Press-Hardening
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-16, 2023
[DOI: 10.1007/978-3-030-98062-7_22-1]

Wesselmecking, Sebastian
Ackermann, Marc Antoni
Blankart, Charline
Wang, Jing
Brasche, Frederike Lina (Corresponding author)
et al.

[Journal Article]
Simultaneous enhancement of mechanical properties and resistance to hydrogen-assisted degradation by multiple precipitation and nano-twinning in medium manganese steel
In: Materials science and engineering / A, 877, 145203, 2023
[DOI: 10.1016/j.msea.2023.145203]

Allam, Tarek (Corresponding author)
Ali, Mohammed
Guo, Xiaofei
Ghosh, Sumit
Haase, Christian
et al.

[Journal Article]
Irregular microstructure-property linkage for cast alloys by a novel deep learning approach: Application on cast austenitic stainless steel
In: Materials today / Communications, 35, 105979, 2023
[DOI: 10.1016/j.mtcomm.2023.105979]

Ma, Bohao
He, Jinshan (Corresponding author)
Ramazani, Ali
Fehlemann, Niklas
Wang, Xitao
et al.

[Journal Article]
Thermal stability and deformation mechanisms in Ni-Co-Fe-Cr-Al-Ti-Nb-type nanoparticle-strengthened high-entropy alloys
In: Journal of materials science & technology, 167, 171-183, 2023
[DOI: 10.1016/j.jmst.2023.05.044]

Hou, J. X.
Zhang, J. Y.
Zhang, J. X.
Luan, J. H.
Wang, Y. X.
et al.

[Journal Article]
Effect of retained austenite on the fatigue behavior of modified bainitic 100Cr6 steels considering local phase transformation
In: Materials science and engineering / A, 877, 145204, 2023
[DOI: 10.1016/j.msea.2023.145204]

Ostermayer, Pascal (Corresponding author)
Allam, Tarek Mansour Abdelraouf
Shen, Xiao
Song, Wenwen
Burkart, Klaus
et al.

[Journal Article]
DRAGen - A Deep Learning Supported RVE Generator Framework for Complex Microstructure Models
In: Heliyon, 9, e19003, 2023
[DOI: 10.1016/j.heliyon.2023.e19003]

Henrich, Manuel (Corresponding author)
Fehlemann, Niklas
Bexter, Felix
Neite, Maximilian
Kong, Linghao
et al.

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung einer Methode zur Abbildung des Traglastverhaltens geschweißter Komponenten unter Anwendung schädigungsmechanischer Simulationsmodelle
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 195-202, 2023

Häffner, Christian
Lenz, David Manfred
Eyben, Felix
Könemann, Markus Josef
Feldmann, Markus
et al.

[Contribution to a book, Contribution to a conference proceedings]
Mikrostruktursensitive Beschreibung der Restbeanspruchbarkeit von Komponenten mit Hilfe virtueller Experimente
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 177-184, 2023

Neite, Maximilian
Könemann, Markus Josef
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Automatisierte Analyse von Bruchflächen mittels künstlicher neuronaler Netzwerke (KNN) für kerntechnisch relevante Sicherheitskomponenten
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 9-16, 2023

Rosenberger, Johannes Vincent
Tlatlik, J.
Münstermann, Sebastian

[Preprint]
Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes, 2023

Stebner, Sophie Charlotte (Corresponding author)
Martschin, Juri
Arian, Bahman
Dietrich, Stefan
Feistle, Martin
et al.

[Book, Dissertation / PhD Thesis]
Behavior/performance of tungsten as a wall material for fusion reactors
In: Schriften des Forschungszentrums Jülich. Reihe Energie & Umwelt = Energy & environment 612, 2023
[DOI: 10.18154/RWTH-2023-07680]

Gago Jiménez, German Mauricio

[Journal Article]
Stand der Untersuchungen zu Werkstoffanforderungen hochfester Stähle S700 bis S960 - FOSTA-Forschungsverbund HOCHFEST
In: Stahlbau, 92 (8), 468-483, 2023
[DOI: 10.1002/stab.202300033]

Feldmann, Markus
Meissner, Mirco (Corresponding author)
Bartsch, Helen
Münstermann, Sebastian
Fehlemann, Niklas
et al.

[Journal Article]
3D characterization of magnetic phases through neutron polarization contrast tomography
In: Additive Manufacturing Letters, 6, 100155, 2023
[DOI: 10.1016/j.addlet.2023.100155]

Busi, Matteo (Corresponding author)
Polatidis, Efthymios
Samothrakitis, Stavros
Köhnen, Patrick
Malamud, Florencia
et al.

[Journal Article]
Near‐Atomic scale characterization of Mn‐Gradient in reverted austenite in Hot‐Rolled Medium‐Mn steels
In: Steel research international, 2300145, 2023
[DOI: 10.1002/srin.202300145]

Shen, Xiao
Qiao, Hanmeng
Song, Wenwen (Corresponding author)
Bleck, Wolfgang

[Journal Article]
Constitutive modeling of temperature and strain rate effects on anisotropy and strength differential properties of metallic materials
In: Mechanics of materials, 184, 104714, 2023
[DOI: 10.1016/j.mechmat.2023.104714]

Pan, Boyu
Shen, Fuhui (Corresponding author)
Münstermann, Sebastian

[Journal Article]
Influence of Transformation Temperature on the High-Cycle Fatigue Performance of Carbide-Bearing and Carbide-Free Bainite
In: Steel research international, 2300238, 2023
[DOI: 10.1002/srin.202300238]

Gulbay, Oguz (Corresponding author)
Ackermann, Marc
Gramlich, Alexander Roald Michael
Durmaz, Ali Riza
Steinbach, Ingo
et al.

[Journal Article]
Festigkeitsbewertung hochfester MSG-Verbindungsschweißungenanhand von Querzugversuchen
In: Schweissen und Schneiden, 75 (7), 454-460, 2023

Reisgen, Uwe
Sharma, Rahul
Christ, Martin Leonhard
Mäde, Konrad Arno Gregor
Münstermann, Sebastian
et al.

[Contribution to a book]
Materials Within a Digitalized Production Environment
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-15, 2023
[DOI: 10.1007/978-3-030-98062-7_6-1]

Broeckmann, Christoph
Bührig-Polaczek, Andreas
Hallstedt, Bengt (Corresponding author)
Krupp, Ulrich
Rajaei, Ali
et al.

[Contribution to a book, Journal Article]
Preheating Influence on the Precipitation Microstructure, Mechanical and Corrosive Properties of Additively Built Al-Cu-Li Alloy Contrasted with Conventional (T83) Alloy
In: Materials, 16 (14), 4916, 2023
[DOI: 10.3390/ma16144916]

Adjei-Kyeremeh, Frank (Corresponding author)
Pratesa, Yudha
Shen, Xiao
Song, Wenwen
Raffeis, Iris
et al.

[Journal Article]
Potential of Integrated Component-Driven Material Design to Improve Crash Box Performance
In: Metals : open access journal, 13 (5), 915, 2023
[DOI: 10.3390/met13050915]

Jafarzadeh-Aghdam, Nima (Corresponding author)
Sparrer, Yannik
Zimmermann, Jannik
Mäde, Konrad Arno Gregor
Sharma, Rahul
et al.

[Journal Article]
Machine learning-based identification of interpretable process-structure linkages in metal additive manufacturing
In: Additive manufacturing, 71, 103585, 2023
[DOI: 10.1016/j.addma.2023.103585]

Ackermann, Marc Antoni (Corresponding author)
Haase, Christian

[Journal Article]
Influence of partitioning treatment on microstructure and mechanical properties of an alloyed ductile iron austempered at different temperatures
In: Materials testing, 65 (6), 896-910, 2023
[DOI: 10.1515/mt-2022-0421]

Nalcaci, Burak (Corresponding author)
Davut, Kemal
Neite, Maximilian
Münstermann, Sebastian
Erdogan, Mehmet

[Journal Article]
Additive manufacturing of metal matrix nanocomposites: Novel approach for nanoparticles dispersion by electromagnetic three-dimensional vibration
In: Materials letters, 344, 134399, 2023
[DOI: 10.1016/j.matlet.2023.134399]

Elsayed, Abdelrahman (Corresponding author)
Haase, Christian
Krupp, Ulrich

[Journal Article]
Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel
In: Ironmaking & steelmaking, 50 (9), 1331-1339, 2023
[DOI: 10.1080/03019233.2023.2204268]

Nalcaci, Burak (Corresponding author)
Baysun, Meltem
Bahador, Abdollah
Umeda, Junko
Münstermann, Sebastian
et al.

[Contribution to a book]
Enablers and Tools for Agile Product Development
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-21, 2023
[DOI: 10.1007/978-3-030-98062-7_18-1]

Kaster, Thomas (Corresponding author)
Ackermann, Marc Antoni
Bailly, David
Bold, Marie-Noemi
Bremen, Thomas
et al.

[Journal Article]
Analysis and improvement of local cleavage fracture models at elevated loading rates
In: Theoretical and applied fracture mechanics, 125, 103857, 2023
[DOI: 10.1016/j.tafmec.2023.103857]

Tlatlik, Johannes (Corresponding author)
Hohe, Jörg
Münstermann, Sebastian

[Journal Article]
Explainable machine learning for predicting the mechanical properties in bainitic steels
In: Materials and design, 230, 111946, 2023
[DOI: 10.1016/j.matdes.2023.111946]

Ackermann, Marc Antoni (Corresponding author)
Iren, Deniz
Yao, Yao

[Journal Article]
Nano-structuring of a high entropy alloy by severe plastic deformation : Experiments and crystal plasticity simulations
In: Acta materialia, 250, 118814, 2023
[DOI: 10.1016/j.actamat.2023.118814]

Kumaran, Surya N. (Corresponding author)
Sahoo, Sudeep K.
Haase, Christian
Barrales-Mora, Luis A.
Toth, Laszlo S. (Corresponding author)

[Journal Article]
Yield Strength Enhancement Without Ductility Loss Through Controlling the Intercritical Annealing Time in Medium-Mn Steels
In: Advanced engineering materials, 25 (15), 2300067, 2023
[DOI: 10.1002/adem.202300067]

Elbeltagy, Asmaa (Corresponding author)
Xu, Zigan
Shen, Xiao
Krupp, Ulrich
Song, Wenwen

[Journal Article]
Influence of the Inherited Structure Induced by Al and Si Alloying on Microstructure Evolution and Mechanical Properties of 100Cr6 Steels
In: Steel research international, 94 (6), 2200804, 2023
[DOI: 10.1002/srin.202200804]

Allam, Tarek Mansour Abdelraouf (Corresponding author)
Ostermayer, Pascal
Blinn, Bastian
Beck, Tilmann
Bleck, Wolfgang

[Journal Article]
Effect of Carbonaceous Residues on the Blast Furnace Operation Efficiency by PC Injection
In: Steel research international, 2200846, 2023
[DOI: 10.1002/srin.202200846]

Babich, Alexander
Perret, Fabian (Corresponding author)
Senk, Dieter
Geyer, Richard Wilhelm
Ho, Hai Thong

[Journal Article]
Identification of Martensite Bands in Dual-Phase Steels : A Deep Learning Object Detection Approach Using Faster Region-Based-Convolutional Neural Network
In: Steel research international, 2200836, 2023
[DOI: 10.1002/srin.202200836]

Fehlemann, Niklas (Corresponding author)
Suarez Aguilera, Ana Lia
Sandfeld, Stefan
Bexter, Felix
Neite, Maximilian
et al.

[Journal Article]
Influence of Press‐Hardening in Combination with Quenching and Partitioning Treatment on the Microstructure of Medium Manganese Steel
In: Steel research international, 2200907, 2023
[DOI: 10.1002/srin.202200907]

Blankart, Charline (Corresponding author)
Emmrich, Robin
Bähren, Lars
Krupp, Ulrich

[Journal Article]
Effect of tempering temperature on the microstructure, deformation and fracture properties of an ultrahigh strength medium-mn steel processed by quenching and tempering
In: Steel research international, 2200902, 2023
[DOI: 10.1002/srin.202200902]

Wang, Hesong (Corresponding author)
Shen, Fuhui
Wang, Yue
Yan, Fengkai
Chang, Zhiyuan (Corresponding author)
et al.

[Journal Article]
Investigation on real slag characterization and slag evolution in cohesive zone based on dissected blast furnace
In: Fuel : the science and technology of fuel and energy, 342, 127780, 2023
[DOI: 10.1016/j.fuel.2023.127780]

Fan, Xiaoyue
Zhang, Jianliang (Corresponding author)
Jiao, Kexin
Wang, Rongrong

[Contribution to a book, Journal Article]
Air cooling martensites—the future of carbon neutral steel forgings?
In: Advanced engineering materials, 25 (15), 2201931, 2023
[DOI: 10.1002/adem.202201931]

Gramlich, Alexander Roald Michael (Corresponding author)
Hagedorn, Wiebke
Greiff, Kathrin
Krupp, Ulrich

[Dissertation / PhD Thesis]
Mechanism-oriented design strategies for the development of new multi-principal element alloys using high-throughput screening methods, 2023
[DOI: 10.18154/RWTH-2023-02588]

Kies, Fabian Martin

[Dissertation / PhD Thesis]
Understanding and improving thermodynamic stability of austenite in low carbon carbide free bainitic steels via ausforming process, 2023
[DOI: 10.18154/RWTH-2023-02072]

Kumnorkaew, Theerawat

[Book, Dissertation / PhD Thesis]
Untersuchungen des Gichtstaubes zur Steuerung des Kohlenstaubeinblasens in den Hochofen
In: Berichte aus dem Institut für Eisenhüttenkunde 1/2023, 2023

Geyer, Richard W.

[Journal Article]
Modeling of microstructural workpiece rim zone modifications during hard machining
In: Journal of materials processing technology, 311, 117815, 2022
[DOI: 10.1016/j.jmatprotec.2022.117815]

Tekkaya, Berk (Corresponding author)
Meurer, Markus Joachim
Dölz, Michael
Könemann, Markus Josef
Münstermann, Sebastian
et al.

[Journal Article]
A data driven computational microstructure analysis on the influence of martensite banding on damage in DP-steels
In: Computational materials science, 218, 111903, 2022
[DOI: 10.1016/j.commatsci.2022.111903]

Pütz, Felix (Corresponding author)
Fehlemann, Niklas
Göksu, Volkan
Henrich, Manuel
Könemann, Markus Josef
et al.